The Legato 210/210P Infuse/Withdraw syringe pump offers unparalleled ease of use through the high resolution touch screen. The basic model works with one syringe or two and can be reconfigured in the field to be used with multiple syringes. The full touch screen interface enables the user to quickly create configurations and recall them for easy use. The 4.3" TFT color display with touch pad interface presents all the pump operating parameters on one easy to view run screen. Protective cover over the display prevents leakage into the display.
To optimize your bench space the Legato 210/210P can be placed on its side to reduce the footprint by 4 times. The footprint is only 3.5 in. x 9.75 in. the display also tilts with the change to allow the user to operate the pump vertically.
Based on Legato 200 the 210 /210P accommodates 2 syringes 0.5 μl to 140 ml. This unit supports infuse only, withdraw only, infuse/withdraw, withdraw/infuse and continuous mode. User defined flow rates with selectable target volumes. The Legato 210P features multi-step programming with user defined configurations/programs of up to 1000 steps. Up to 40 programs of 25 steps each can be stored in memory.
|Signal Output||RS232 9Pin D-Sub Connector, RS485 IEEE-1394 6 pos, USB Type B, I/O & TTL 15 pin D-Sub Connector|
|Power Supply||100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse|
|Dimensions||16.51 x 25.4 x 27.94 cm|
|Syringes (Min/Max)||0.5 µl to 140 ml|
|Max Linear Force||34 kg @ 100% Force Selection|
|Drive Motor||1.8 degree Stepper Motor|
|Number of Microsteps per one rev.of Lead Screw||6400|
|Pusher Travel Rate - Minimum||0.36 µm/min|
|Pusher Travel Rate - Maximum||190.80 mm/min|
|Flow Rate Minimum||3.06 pl/min (0.5 µl syringe)|
|Flow Rate Maximum||215.8 ml/min (140 ml syringe, 37.948 mm inner diameter)|